» Optimizing WebGL
Due to the extra validation that WebGL needs to impose to ensure web security, the CPU side overhead of running WebGL applications is known to be higher in comparison to native OpenGL applications. Because of this, porting graphics heavy applications can become bottlenecked on the CPU side when interfacing with GL functions. Therefore for best performance, special care should be taken to profile and optimize GL API usage in applications that are expected to be WebGL heavy. This optimization guide focuses on different techniques that have been found useful for improving WebGL performance.
There are so many GL hardware and driver vendors out there, as well as operating system combinations, such that generating a specific optimization guide is difficult. Some optimizations that are efficient on certain hardware/driver/OS combinations have been seen to not make much difference on drivers from another vendor. Fortunately it has been somewhat rare to find a conflicting scenario where certain optimization for one driver would have led to falling down a performance cliff on hardware from another GPU vendor. Most often when this happens it is due to a specific feature not being supported by a particular hardware, which causes the driver to resort to emulation. For example, in one case it was found that a native GL driver advertises having support for the ETC2 compressed texture format, even though the graphics hardware did not implement this, and in another case, it was found that using vertex shader primitive restart index would cause the GL driver to fall back to running vertex shaders in software. Unfortunately OpenGL specifications do not provide means for a driver to report these types of performance caveats, which is why being able to benchmark across a large variety of target hardware is almost necessary when optimizing GL. It is also useful to pay close attention to the web page console of the browser when running, since browsers can report extra performance warnings in the console logs.
It should also be acknowledged that some detected performance issues have been due to inefficiencies or outright performance bugs in browsers and their utilized software libraries, and have nothing to do with the underlying GL drivers or web security in general. When initially working on optimizing Emscripten ported GL codebases, most browsers were found to be inefficient with their WebGL stacks, but this was to be expected, since before Emscripten and asm.js, it was not even possible to perform such precise GL performance comparisons between native versus the web, such that a large number of performance critical issues fell through the gaps. This aspect has steadily been improving as more people stress WebGL with large Emscripten codebases, so some of the items in this guide might not be relevant in the future. If reading this guide in the future you do find something that seems like a net loss in all cases, please do submit a doc PR to discuss. Likewise, if certain GL access pattern is orders of magnitude slower on the web compared to native, it is likely to be a performance bug.
The following optimization tips list different situations that have been known to make an impact in practice, although it is advised to never perform an optimization blindly, but keep the profiler close at hand when experimenting.
Emscripten allows targeting various different OpenGL and OpenGL ES API flavors with different linker flags.
By default, if no special GL related linker flags are chosen, Emscripten targets the WebGL 1 API, which user code accesses by including OpenGL ES 2.0 headers in C/C++ code (
#include <GLES2/gl2.h> and
#include <GLES2/gl2ext.h>). This mode works like GLES 2, with the exception that a number of WebGL specific changes and restrictions are applied. For a close to complete reference of differences between WebGL 1 and OpenGL ES 2, refer to WebGL 1 Specification: Differences Between WebGL and OpenGL ES 2.0.
-s FULL_ES2=1. This mode is convenient to ease porting of new codebases, however WebGL itself does not support rendering from client side memory, so this feature is emulated. For best performance, use VBOs instead and build without the
-s FULL_ES2=1linker flag.
-s LEGACY_GL_EMULATION=1flag. However, when building in this mode, even if it works, do not expect good performance. If the application is slow in this mode and it only uses fixed pipeline and no shaders at all, it is also possible to pair
-s GL_FFP_ONLY=1linker flag to attempt to recover some performance. Although in general it is recommended to spend the effort to port the application to use WebGL 1/OpenGL ES 2 instead.
glMapBuffer*()API is needed, pass the linker flag
-s FULL_ES3=1to emulate these features, which core WebGL 2 does not have. This emulation is expected to hurt performance, so using VBOs is recommended instead.
-s MAX_WEBGL_VERSION=2and make sure to create a WebGL 2 context at GL startup time (OpenGL ES 3 context if using EGL).
A mix of tools are available for measuring GL performance. In general, here it is recommended that developers do not restrict the focus to only searching for web browser specific profiling tools, but in practice native profilers have been found to work equally well, if not even better. The only drawback when using a native profiler is that some intimate knowledge of how WebGL is implemented in the browser can be critical, or it might be difficult to understand the call streams going to the GPU otherwise.
about:configand set the pref
false, and restart the browser.
about:configand set the pref
trueand reload the page.
In WebGL, every single GL function call has some amount of overhead, even those that are seemingly simple and do nearly nothing. This is because WebGL implementations need to validate each call since the underlying native OpenGL specifications provide no guarantees about security that could be relied upon on the web. Additionally in asm.js/WebAssembly side, each WebGL call generates an FFI transition (a jump between executing code in asm.js context and executing code in browser’s native C++ context), which has a slightly higher overhead than a regular function call inside asm.js/WebAssembly. Therefore on the web, it is generally best for CPU side performance to attempt to minimize the number of calls that is made to WebGL. The following tips can be applied here.
Optimize the renderer and input assets at high level to avoid redundant calls. Refactor the design if needed so that the renderer is able to better reason what kind of state changes are relevant and which ones are not needed. The best kind of cache is one that is unnecessary, so if the high level renderer is able to keep the GL call stream lean, that will produce the fastest results. However, in cases when that is difficult to achieve, some types of lower level caching can be effective, discussed below.
Cache GL state inside the renderer code, and avoid doing redundant calls to set the same state multiple times if it has not changed. For example, some engines might blindly reconfigure depth testing or alpha blending modes before each draw call, or reset the shader program for each call.
Avoid all types of renderer patterns which reset the GL to some specific “ground state” after certain operations. Commonly seen occurrences are to
for(i in 0 -> max_attributes) glDisableVertexAttribArray(i); after issuing each draw call to revert to a known fixed configuration. Instead, lazily change only the GL state that is needed when transitioning from one draw call to another.
Consider lazily setting GL state only when it needs to take effect. For example, in the following call stream
// First draw glBindBuffer(...); glVertexAttribPointer(...); glActiveTexture(0); glBindTexture(GL_TEXTURE_2D, texture1); glActiveTexture(1); glBindTexture(GL_TEXTURE_2D, texture2); glDrawArrays(...); // Second draw (back-to-back) glBindBuffer(...); glVertexAttribPointer(...); glActiveTexture(0); // (*) glBindTexture(GL_TEXTURE_2D, texture1); // (*) glActiveTexture(1); // (*) glBindTexture(GL_TEXTURE_2D, texture2); // (*) glDrawArrays(...);
all the four API calls marked with a star are redundant, but simple state caching is not quite enough to detect this. A lazier state cache mechanism will be able to detect these types of changes. However, when implementing deeply lazy state caches, it is recommended to do so only after having profiling data to motivate the optimization, because applying lazy caching techniques to all GL state prior to render can become costly as well for other reasons, and performance may be wasted if the renderer already is good at avoiding resubmitting redundant calls. Just right amount of caching can require a bit of tuning to find the balance.
A good rule of thumb is that a renderer that inherently avoids redundant state calls in the first place by high level design is generally more efficient than one that relies heavily on state caching at the low level.
In addition to removing API calls that are outright redundant, it is good to also pay attention to how to minimize state changes using other techniques. The following checklist offers some possibilities.
glUniform4fv()array call, instead of calling
glUniform4f()multiple times to update each one individually. Or better yet, use Uniform Buffer Objects in WebGL 2.
glGetUniformLocation()at render time, but query the locations once per shader program at startup and cache them.
The most important aspect of efficient GPU usage is to make sure that the CPU will never need to block on the GPU during render time, and vice versa. These types of stalls create extremely costly CPU-GPU sync points, which lead to poor utilization of both resources. Generally a hint of this type of a scenario happening can be detected by observing overall GPU and CPU utilization rates. If a GPU profiler is claiming that the GPU is idle for large portions of the time, but a CPU profiler is claiming that the CPU in turn is idle, or that certain GL functions take a very long time to complete, it suggests that frames are not being efficiently submitted to the GPU, but GPU-CPU sync(s) occur somewhere during draw call submission. Unfortunately OpenGL specifications do not provide any performance guarantees of which GL calls may cause a stall, so look out for the following behavior and experiment by changing these and reprofiling the effects.
- Avoid creating new GL resources at render time. This means optimizing out calls to
glCreateShader()and so on) at render time. If new resources are needed, try to create and upload them a couple of frames before attempting to render using them.
- Likewise, do not delete any GL resources that have just been rendered with. The functions
glDelete*()can introduce a full pipeline flush if the driver detects that any of the resources are in use. It is better to delete resources at loading time only.
- Never call
glCheckFramebufferStatus()at render time. These functions should be restricted to be checked at loading time only, since both of these can do a full pipeline sync.
- Similarly, do not call any of the
glGet*()API functions at render time, but query them at startup and loading time, and refer to cached results at render time.
- Try to avoid compiling shaders at render time, both
glLinkProgram()can be extremely slow.
- Do not call
glReadPixels()to copy texture contents back to main memory at render time. If necessary, use the WebGL 2
GL_PIXEL_PACK_BUFFERbinding target instead to copy a GPU surface to an offscreen target first, and only later
glReadPixels()the contents of that surface back to main memory.
Transferring memory between the CPU and the GPU is a common source of GL performance issues. This is because creating new GL resources can be slow, and uploading or downloading data can block the CPU if the data is not ready, or if an old version of the data is still needed before being able to overwrite it with a new version.
glBindBuffer()calls when setting up vertex attribute pointers for rendering.
glTexImage2D/3D()to resize the contents of a buffer or a texture at runtime. When increasing or decreasing dynamic VBO sizes, use std::vector-style geometric array grow semantics to avoid having to resize every frame.
glTexSubImage2D/3D()when updating buffer texture data, even when the whole contents of the texture or the buffer changes. If the size of a buffer would shrink, do not eagerly re-create the storage, but simply ignore the excess size.
GL_DYNAMICvertex buffers over
After having verified that CPU-GPU pipeline sync bubbles do not occur, and rendering is still GPU bound, the following optimizations can be useful.
glDiscardFramebuffer()when the contents of an FBO are no longer needed.
Finally, a number of miscellaneous optimizations have been proven to be effective.
-s GL_PREINITIALIZED_CONTEXT=1can help in authoring a html shell page that performs such texture format checks up front.
"webglcontextcreationerror"callback. Browsers can give good diagnostics in the context creation error handler to allow diagnosing what the root cause is.
failIfMajorPerformanceCaveatflag to detect when rendering on software, and cut down on graphics fidelity in such cases.
*glGetProcAddress()API functions. Emscripten provides static linking to all of the GL API functions, even for all WebGL extensions. The
*glGetProcAddress()API is only provided for compatibility to ease porting of existing code, but accessing WebGL via calling dynamically obtained function pointers is noticeably slower than direct function calls, due to extra function pointer security validation that dynamic dispatching has to do in asm.js/WebAssembly. Since Emscripten provides all of the GL entry points statically linked in, it is recommended to take advantage of this for best performance.
requestAnimationFrame()loops to render animation instead of the
setTimeout()API. This gives the smoothest scheduling on the animation ticks.
Because of this source of free performance, it is heavily recommended that all developers migrate to target WebGL 2 even if no other WebGL 2 features are needed, if performance is a concern. WebGL 2 is available starting from Firefox 51 and Chrome 58 (see #4945). See also caniuse: WebGL 2 table. With a little care, it is possible to simultaneously target both WebGL 1 and WebGL 2 APIs, and leverage the best performance when available, but gracefully fall back on less compatible GPUs.
Migration to WebGL 2 is slightly complicated by the fact that WebGL, just like OpenGL ES, is not a backwards compatible API. That is, WebGL 1/OpenGL ES 2 applications do not generally work just by initializing a newer version of the GL context to run on WebGL 2/OpenGL ES 3.0. The reason for this is that a number of backwards compatibility breaking changes have been introduced between the two versions. However, these changes are more superficial/cosmetic rather than functional, and feature-wise, WebGL2/OpenGL ES 3.0 encompasses all features that exist in WebGL 1/OpenGL ES 2. Only the way that the different API functions are invoked has changed.
To migrate from WebGL 1 to WebGL 2, pay attention to the following list of known backwards incompatibilities.
In WebGL 2, a number of WebGL 1.0 extensions have been incorporated to the core WebGL 2 API, and those extensions are no longer advertised to exist when querying for the list of different WebGL extensions. For example, the presence of instanced rendering in WebGL 1 is provided by the ANGLE_instanced_arrays extension, but this is a WebGL 2 core feature, and is therefore no longer reported in the list of GL extensions. If targeting both WebGL 1 and WebGL 2 simultaneously in an application, remember to check both the extension and the core context version number when detecting the presence of a feature.
A side effect of the above is that when the functionality was merged to core, the specific function names to call for the feature has changed, i.e. on WebGL1/GLES 2 contexts, one would call the function
glDrawBuffersEXT(), but with WebGL2/GLES 3.0, one should call the unsuffixed function
The full list of WebGL 1 extensions that were adopted to the core WebGL 2 specification is:
ANGLE_instanced_arrays EXT_blend_minmax EXT_color_buffer_half_float EXT_frag_depth EXT_sRGB EXT_shader_texture_lod OES_element_index_uint OES_standard_derivatives OES_texture_float OES_texture_half_float OES_texture_half_float_linear OES_vertex_array_object WEBGL_color_buffer_float WEBGL_depth_texture WEBGL_draw_buffers
These extensions were adopted without any functional changes, so when initializing a WebGL2/GLES 3.0 context, these can be used directly without checking for the presence of an extension.
#version 100version pragma in shader code. WebGL 2 introduced new shader language version, The OpenGL ES Shading Language, Version 3.00, which is identified by the pragma directive
#version 300 esin shader code.
#version 100shaders, or migrate to using WebGL 2/GLES 3.0
#version 300 esshaders. Note however that WebGL 2 has a backwards breaking incompatibility that the WebGL extensions
EXT_shader_texture_lodare no longer available in
#version 100shaders, because those features are no longer present as extensions.
#version 100shaders that use those extensions must be rewritten to
#version 300 esformat instead. Emscripten provides a linker flag
-s WEBGL2_BACKWARDS_COMPATIBILITY_EMULATION=1which performs a string search-replace based automatic migration of
#version 100shaders to
#version 300 esformat when either of these extensions are detected to attempt to hide this breakage in backwards compatibility.
internalFormatfield. For example, instead of creating a texture with
format=GL_DEPTH_COMPONENT, type=GL_UNSIGNED_INT, internalFormat=GL_DEPTH_COMPONENT, it is required to specify the size in the
format=GL_DEPTH_COMPONENT, type=GL_UNSIGNED_INT, internalFormat=GL_DEPTH_COMPONENT24.
OES_texture_half_floatwas subsumed to the core WebGL 2/GLES 3.0 specification. In WebGL1/GLES 2, half floats were denoted by the value
GL_HALF_FLOAT_OES=0x8d61, but in WebGL2/GLES 3.0, the enum value
GL_HALF_FLOAT=0x140bis used, contrast to other texture type extensions where inclusion to the core specification generally preserved the value of the enum that is used.
Overall, to ease simultaneously targeting both WebGL1/GLES 2 and WebGL2/GLES 3.0 contexts, Emscripten provides a linker flag
-s WEBGL2_BACKWARDS_COMPATIBILITY_EMULATION=1, which hides the above differences behind automatically detected migration, to allow existing WebGL 1 content to transparently also target WebGL 2 for the free speed boost it provides.
If you find a missing item in this emulation, or have comments to improve this guide, please submit feedback to the Emscripten bug tracker.